Spray paint temporary fabric enclosures?

I need an enclosure for spray painting offices and apartments, so i can spray inside a room, put some kind of door and use some fume extracting system, any ideas or internet sites where i can find such a thing???

I build temporary spray paint booths from pine 2x2 lumber and clear pit lining plastic or heavy drop cloth. Then just cut a hole in one end for a box fan and in the other for an inlet vent. I cover the inlet vent hole with a furnace filter. NOTE: box fan not safe with oil based paint. explosion hazard. Use with water based paint only.

Don't know of a site, but with a baby in the house we used 1" x 2" boards and stapled plastic over it to limit the fumes getting to the rest of the house, we took off the door trim to paint anyway, so we just used a few nails to tack the 1" x 2" to the door frame, stapled the plastic to the 1" x 2" and then would pull one side lose to make an exit and could staple it back shut on retry. We used an open window and a fan was our ventilation system.

For the fumes you can make your own. It must be vented to an outside opening ( door , window ) just get a higher volume fan and make an frame that will fit tight to door or window opening. Point the fan to blow out and your up and going